Aghakhani, I. Basdogan, A. Erturk, “Equivalent Circuit Modeling of patch-based piezoelectric energy harvesting on plate-like structures with Ac-dc conversion,” Proceedings of the ASME 2015 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS2015, Denver, Colorado, September, 2015.
Aghakhani, I. Basdogan, A. Erturk, “Equivalent Circuit Modeling and Experimental Validation of a Piezoelectric Energy Harvester Attached on a Thin Plate with AC-DC Conversion,” ICAST2015: 26 th International Conference on Adaptive Structures and Technologies Kobe, Japan, October, 2015.
Askin E, Boz U., Sendur P., Basdogan I., Gur Y., “Active Vibration Control on a Complex 3D Structure Using Piezoelectric Patches”, International Conference on Sound and Vibration (ICSV) 2015.
Bayik, A. Aghakhani, U. Aridogan, and I. Basdogan, 2014, “Piezoelectric Patch-Based Energy Harvesting on a Heavy Duty Vehicle Panel”, Proceedings of the 6th ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS), New Port, RI, USA, September, 2014.
Aridogan, I. Basdogan, and A. Erturk, “Broadband and band-limited random vibration energy harvesting using a piezoelectric patch on a thin plate”, SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, USA, March 2014.
Aridogan, U., Basdogan, I., and Erturk, A., “Multiple Patch-Based Piezoelectric Energy Harvesting from Multiple Vibration Modes of Thin Plates,” Proceedings of the 6th ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Snowbird, UT, September 2013.
Aridogan, U., Basdogan, I., and Erturk, A., 2013, “Electroelastic finite-element modeling and experimental validation of structurally-integrated piezoelectric energy harvesters,” Proceedings of the ASME 2013 IDETC 25th Biennial Conference on Mechanical Vibration and Noise, Portland, OR, August 2013.
Boz, S.Necipoglu, I.Basdogan, “Multimodal Vibration Suppression of a Flexible Thin Plate Using a MIMO Control Methodology,” ICSV 2013, Bangkok, Thailand, July 2013.
Aridogan, I. Basdogan, and A. Erturk, “Broadband and band-limited random vibration energy harvesting using a piezoelectric patch on a thin plate”, SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, California, USA , March 2013.
Kulah, U. Aridogan, I. Basdogan, “Investigation of an Active Structural Acoustic Control System on a Complex 3D Structure”, Proceedings of the SEM IMAC XXXI Conference, Garden Grove, California USA, Feb. 2013.
Kulah, U. Arıdogan and I. Basdogan, “Active Vibration Controller Design to Improve Sound Pressure Level Inside the Passenger Cabin”, Proceedings of International Symposium on the Computational Modelling and Analysis of Vehicle Body Noise and Vibration (COMVEBONOV), Brighton, UK, March 2012.
Boz, S. Kulah, U. Aridogan, and I. Basdogan, “Analog Velocity Feedback Controller for Effective Vibration Suppression and Sound Attenuation”, Proceedings Of The ASME 2011 Conference On Smart Materials, Adaptive Structures And Intelligent Systems, SMASIS 2011, Phoenix, Arizona, USA, September 2011.
Kulah, U. Boz, and I. Basdogan, “Application of Proportional Velocity Feedback Control to Attenuate the Vibrations of a Flexible Plate using Piezoceramic Patch Actuators”, Proceedings of 10th biennial International Conference on Vibration Problems, Praque, Czech Republic, September 2011.
Ucar and I. Basdogan, “A Validation Study of the Structural Modification Technique for Vibro-Acoustic Analysis”, Proceedings of 18th International Congress on Sound and Vibration, Rio De Janerio, Brazil, July 2011.
Yuksel and I. Basdogan, “Vibro-Acoustic Analysis of a Vehicle Integrated with Design of Experiments Methodology using Three Performance Criteria”, Proceedings of 20th International Congress on Acoustics, Sydney, Australia, August, 2010.
Demirkan, I Basdogan, H. N. Ozguven, M. Caliskan, “Prediction Of Vibro-Acoustic Response of Enclosed Spaces by Using Structural Modification Techniques”, Proceedings of ISMA2010 International Conference on Noise and Vibration Engineering, September, 2010.
Kamci, I. Basdogan, A. Gel, E. S. Gel, A. Koyuncu, and I. Yilmaz, “Vibro-Acoustic Analysis of a Commercial Vehicle Integrated with Design of Experiments Methodology”, Proceedings of 8th World Congress on Structural and Multidisciplinary Optimization, Lisbon, Portugal, June, 2009.
Basdogan, G. Canbaloglu, G. Kamci, and H. N. Ozguven, “A Structural Modification Methodology Adapted To a Vibro-Acoustic Model to Improve the Interior Noise”, Proceedings of Euronoise 2009, Edinburgh, United Kingdom, October, 2009 .
Kamci, I. Basdogan, A. Koyuncu, I. Yilmaz, “Vibro-Acoustic Modeling of a Commercial Vehicle to Reduce the Interior Noise Level”, InterNoise 2008, Shanghai, China, October, 2008.
Kamci and I. Basdogan, “Investigating the Sound Pressure Level Inside the Passenger Cabin of an Automobile Using a Vibro-Acoustic Model”,EURODYN 2008, 7th European Conference on Structural Dynamics , July, 2008.
I. Veryeri, I. Basdogan, “Dynamic Characterization and Damping Control of a MEMS Structure,” Proceedings of ISOT 2007, International Syposium on Optomechatronic Technologies, Lausanne, Switzerland, October, 2007.
Buyukyazi, I. Basdogan, “Investigation of the Limitations of the Motion Estimation Algorithms for Measuring MEMS in-plane vibrations,” Proceedings of 2007 NSTI Nanotechnology Conference and Trade Show, Santa Clara, CA, May, 2007.
Dikmen, I. Basdogan, “Experimental and Numerical Study for determining the mechanical properties of automobile weatherstrip seals, “Proceedings of 8th Biennial ASME Conference on Engineering Systems Design and Analysis, ESDA 2006, Torino, Italy, July, 2006.
Dikmen, I. Basdogan, “A study on modal characteristics of a commercial vehicle rear door”, Proceedings of International Conference on Noise and Vibration Engineering, ISMA 2006, Leuven, Belgium, September, 2006.
Anac, I. Basdogan, “Application of a Design Methodology using a 2D Micro Scanner”, Proceedings of 2006 NSTI Nanotechnology Conference and Trade Show, Boston, MA, May 2006.
Anac, I. Basdogan, “Model Validation Methodology for Design of Micro Systems”, Proceedings of 8th Biennial ASME Conference on Engineering Systems Design and Analysis, ESDA 2006, Torino, Italy, July, 2006.
C. Meral, I. Basdogan, “Dynamic Analysis of a Torsional MEMS Scanner Mirror, Part I: Disturbance Analysis Framework”, Proceedings of ASME 2005 International Design Conferences, Long Beach, CA, September, 2005.
C. Meral, I. Basdogan, “Dynamic Analysis of a Torsional MEMS Scanner Mirror, Part II Sensitivity Analysis Framework”, Proceedings of ASME 2005 International Design Conferences, Long Beach, CA, September 2005.
Hakan Urey, Arda D. Yalcinkaya, Tom Montague, Dean Brown, Randy Sprague, Ozan Anac, Caglar Ataman, Ipek Basdogan, “Two-axis MEMS Scanner for Display and Imaging Applications”, IEEE Optical MEMS, Oulu, Finland, August, 2005.
Shaklan, M. Milman, J. Catanzarite, I. Basdogan, M. Papalexandris, and L. Sievers, “Overview of On-Orbit Instrument Calibration for SIM,”Proceedings of SPIE Astronomical Telescopes and Instrumentation Conference, Waikoloa, Hawaii, August, 2002.
Catanzarite, M. Milman, and I. Basdogan, “Improving on Apriori Knowledge of Star Positions With the Uncalibrated SIM Instrument,” Proceedings of SPIE Astronomical Telescopes and Instrumentation Conference, Waikoloa, Hawaii, August, 2002.
Sievers, R. P. Korechoff, M. Milman, S. Shaklan, J. Catanzarite, I. Basdogan, M. Papalexandris, and R. Swartz, “Overview of SIM Wide Angle Astrometric Calibration Strategies,” Proceedings of SPIE Astronomical Telescopes and Instrumentation Conference, Waikoloa, Hawaii, August, 2002.
W. Miller, O. L. de Weck, S. A. Uebelhart, R. Grogan, I. Basdogan, “Integrated Dynamics and Controls Modeling for theSpace Interferometry Mission (SIM),” Proceedings of the 2001 IEEE Aerospace Conference, Big Sky, Montana, March, 2001.